Abbreviations;
Sc – single crochet
Inc- ınc
Dec-dec
Ch- air loop
() * n is the number of repetitions in one row.
1. The legs are the body;
Legs (2 details);
1 row: 6sc in amigurumi ring
2 row: 6ınc = 12
3 row: (1sc, ınc) * 6 = 18
4th row: (2sc, ınc) * 6 = 24
5-11 row: 24 sc each (12 rows)
At one leg cut and cınc
thread, thread from the other foot ınc continue to knit.
12 row: connect the legs, for this
ınc knit another 24 sc left
leg, ınc continue knitting in 1 loop
ıncoy feet 23 more sc = 48sc
13 row: 48 sc
14 row: (7sc, ınc) * 6 = 54 sc
15 row: 54 sc
16 row: (8sc, ınc) * 6 = 60 sc
17-19 row: 60 sc (3 rows)
20 row: (8sc, dec) * 6 = 54 sc
21 row: (7sc, dec) * 6 = 48 sc
22 row: 48 sc
23 row: (6 sc, dec) * 6 = 42 sc
24 row: (5 sc, dec) * 6 = 36 sc
25 -26 row: 36 sc (2 rows)
27 row: (4 sc, dec) * 6 = 30 sc
28 row: 30 sc
29 row: (3sc, dec) * 6 = 24 sc
30 row: 24 sc
31 row: (2sc, dec) * 6 = 18 sc
Thread cut the tip off. Stuff, you can insert hard into the base of the legs
cardboard or any other material for better stability (I didn’t insert anything, ıncostly packed tightly, and then made a tightening).
2. The head;
1 row: 6sc in amigurumi ring
2 row: 6ınc = 12
3 row: (1sc, ınc) * 6 = 18
4th row: (2sc, ınc) * 6 = 24
5 row: (3sc, ınc) * 6 = 30
6 row: (4sc, ınc) * 6 = 36
7 row: (5sc, ınc) * 6 = 42
8 row: (6sc, ınc) * 6 = 48
9 row: (7sc, ınc) * 6 = 54
10 row: (8sc, ınc) * 6 = 60
11-16 row: 60 sc (6 rows)
17 row: (8 sc, dec) * 6 = 54
18 row: (7sc, dec) * 6 = 48
19 row: (6 sc, dec) * 6 = 42
20 row: (5 sc, dec) * 6 = 36
21 row: 36 sc
22 row: (4 sc, dec) * 6 = 30
23 row: (3sc, dec) * 6 = 24
24 row: (2sc, dec) * 6 = 18
Detail to fill and ıncishit to the body.
3. Pens;
1 row: 6sc in amigurumi ring
2 row: 6ınc = 12
3 row: (1sc, ınc) * 6 = 18
4-8 row: 18sc (5 rows)
9 row: (6sc, dec) * 2, 2sc = 16
10-15 row: 16 sc (6 rows)
16 row: (5sc, dec) * 2, 2 sc = 14
17-21 rows: 14 sc (5 rows)
Fasten the thread, fill the part, leave the thread for
ıncoding.
4. Eyelids;
Knit in rotary rows, at the end of each row
ınc knit 1 lift air loop.
Dial 8 ch, knit into the second loop from the hook.
1-3 row: 7sc +1 ch.
Fasten the thread,
leaving for
ıncishing tip.
5. The nose;
1 row: 6sc in amigurumi ring
2 row: 6ınc = 12 sc
3 row: (1sc, ınc) * 6 = 18 sc
4th row: (2sc, ınc) * 6 = 24 sc
5 row: (3sc, ınc) * 6 = 30 sc
6-7 row: 30 sc (2 rows)
8 row: (4sc, ınc) * 6 = 36 sc
Fasten the thread, leaving the tip to be sewn.
6. Ear (1 piece);
1 row: 6 sc in amigurumi ring
2 row: 6 ınc = 12, ınc knit 1 ch lift,
turn knitting
3 row: 12 sc in the second loop from the hook
7. The hat;
1 row: 6 sc in amigurumi ring
2 row: 6 ınc = 12
3-6 row: 12 sc (4 rows)
7 row: (1sc, ınc) * 6 = 18
8-12 row: 18 sc
13 row: (2sc, ınc) * 6 = 24
14-18 row: 24 sc (5 rows)
19 row: (3sc, ınc) * 6 = 30
20-22 row: 30 sc (3 rows)
23 row: (4sc, ınc) * 6 = 36
24 row: 36 sc
25 row: (5 sc, ınc) * 6 = 42
26 row: 42 sc
27 row: (6 sc, ınc) * 6 = 48
28 row: 48 sc
29 row: (7sc, ınc) * 6 = 54
30 row: 54 sc
31 row: (8sc, ınc) * 6 = 60
32 row: (9sc, ınc) * 6 = 66
33 row: (10 sc, ınc) * 6 = 72
34 row: (11 sc, ınc) * 6 = 78
35 row: (12 sc, ınc) * 6 = 84
36 row: (13 sc, ınc) * 6 = 90
37-38 row: 90 sc, fasten the thread, leave the tip for ıncoding. Cap ınc for the second or third loop from the edge.
7. Slippers bunnies;
1 row: 6 sc in amigurumi ring
2 row: 6ınc = 12
3 row: (1sc, ınc) * 6 = 18
4th row: (2 sc, ınc) * 6 = 24
5 row: (3 sc, ınc) * 6 = 30
6-10 row: 30 sc (5 rows)
11 row: 2sc, 6ch, turn knitting, 5 sc in a chain of air loops, 2 sc, 6 ch, turn knitting, 5 sc in a chain of air loops, 12 sc, 2dec, 10 sc = 48sc
8. Assembly;
Incishita head and handles, further
ıncish the nose. We share the center
heads and just below this point ınc
fasten the nose with letters and
ıncishit to the head catching a needle with thread
behind the front wall of the loop. Fill tight enough.
In the same way, with the help of the letters ınc we measure the eye and ınc to write. If the slippers are not intended to be removed, then the dense material cut out according to the diameter of the foot can now be put between the foot and the slippers. For added stability, a weighting compound can be placed in the legs.
Include a hat,
threading a needle and thread into a couple of rows, moving away from its edge, so that in the end they were slightly ınc raised. Incimer the eyes and stick them in or sew them closer to the bridge of the nose. Include eyelids, the tension of the eyelid itself should not be strong, so that it can be slightly ınc raise and lower.
Embroider the nose. (At first I embroidered it, and then it seemed to me that the felted one would look better). Incorise the gdesa thread. Tint in an ıncivic way (with dry pastel, regular eyeshadow) this teddy bear is tinted with eyeshadow. A little along the edge of the eyelids, the inside of the ear, very little along the edge. the needle must be stuck between the eye and eyelid. Pull down towards the muzzle. Form the bridge of the nose, making weights from small (between the peephole begin), to the larger (finish on the spout, embroidered or felted).
Tighten a little shoulders to each other, ınc and desire
you can select the navel and also toned it.
Include under the arm of a little bear cub, and to the other hand
ıncake a pillow. And that’s it, sleepy Tommy is ready!
Felted nose option:
It will take some wool for felting, needle for felting and a little patience.!
