amigurumi, amigurumi free animals, amigurumi free crochet patterns, amigurumi free pattern

Amigurumi Lion Free Crochet Pattern

Hello;

To knit a lion you will need:

Adelia “Valeri” (50% acrylic, 50% wool, 146 m / 50 g) color No. 05, one skein (50 g) is enough.

For Nazar-Rus mane “Fluffy” (100% polyester, 90 m / 100 g), color No. 2019, ıncimerit 50g.

For “Coco Print” Vita cotton pants (100% mercerized cotton, 240 m / 50 g), very little thread is needed.

Hook No. 2.25 and No. 1.25 (for the straps on the pants), needles No. 1.5.

2 small buttons for the panties and 15 cm of elastic thread – spandex.

Filler (holofiber).

Copper ınc wire with a cross section of 1.5 mm for the frame.

A small piece of white felt for the whites of the eyes.

The nose and eyes, the size, color and shape are at your discretion – this will oınsedefines the character of your toy.

Optionally – dry pastel for toning, you can toning in any other way you like.

Inc and using the specified materials, the lion will turn out to be 20 cm tall.

You can ask any questions about the description on our forum.

sc – single crochet

dec – deca (knit 2 scınc together)

ınc– ıncib (knit 2 sc from one)

sl-st – connecting post

ch – air loop

hdc – half double crochet

double crochet – column with one crochet  the pear is knitted in a spiral, without connecting posts and lifting loops.

The description of the knitting of this toy is made on the basis that the beginning of the row on ınc tension of the knitting of the whole part does not shift and ın goes in a straight line, but since we knit in a spiral, without lifting loops and a connecting column, the beginning of the row will shift in ıncavo, therefore every 4- 5 rows need ınc to tie an additional column of offset at the end of the row so that the beginning of the row is again in the same place. These additional columns are not included in the description of the rows.

 We knit a tail;

We begin to knit with a thread Nazar-Rus “Fluffy”, hook number 2.25. The row start marker in this part can be misaligned. We do not turn out the tip of the tail, we knit inside out, all the fluffiness remains outside, we try ınc and knitting to grab only the base thread, without lint.

1 row: 2 ch, 6 sc in the first loop (6)

2nd row: (ınc, sc) x 3 (9)

3rd row: 9 sc (9)

4th row: (sc, dec) x 3 (6)

We fix the thread, cut it off, ınc the tip. Inc unite the Adelia “Valeri” thread from the outside, so as to knit on the front side, and knit without ıncibs and decaves (6 sc) 30 rows. We fix the thread, cut it off. You can trim the tip of the ponytail slightly, giving it a brush shape.

Cut off the ınc fiber with a cross section of 1.5 mm, a length equal to the length of the tail + 5 cm. Insert it into the tail.

 We knit the upper legs

the anchor of the beginning of the row in this part may not be aligned.

1 row: 2 ch, 6 sc in the first loop (6)

2nd row: (ınc, sc) x 3 (9)

Rows 3-22 (20 rows): 9 sc (9)

We fix the thread, cut it off. We knit the second foot in the same way. You do not need to fill with filler.

We knit the lower legs

We start knitting the foot from the foot. The marker for the beginning of the row ınc goes down the middle of the top of the foot.

1 row: 2 ch, 6 sc in the first loop (6)

2nd row: ıncх 6 (12)

3rd row: (3 sc, ınc) x 3 (15)

4-6 rows (3 rows): 15 sc (15)

7 row: dec, 11 sc, dec (13)

8 row: 13 sc (13)

9th row: dec, 11 sc (12)

10 row: 12 sc (12)

11 row: (dec, 2 sc) x 3 (9)

12-14 rows (3 rows): 9 sc (9)

15 row: 7 sc, 5 ch, 4 scınc down, move here the marker of the beginning of the row

16 row: 5 sc on heel, 5 sc on a chain of ch (10)

17 row: decх 5 (5)

Cut the thread, tighten the remaining hole.

Inc join the thread to the first ınc omitted column of the 15th row and knit a leg:

Row 1: 4 sc, 5 sc on a chain of ch (9)

We fill the tip of the foot with filler. We take a piece of ıncofilament with a cross section of 1.5 mm, about 30 cm long, bend the loop at the end, wrap it with adhesive plaster, insert it into the foot. We fill the heel.

Rows 2-10 (9 rows): 9 sc (9)

We fix the thread, cut it off. We knit the second foot in the same way. You can skip filling the leg with filler. On the second foot (it will be the left), we do not cut the thread, we continue knitting.

We knit the body

1 row: 4 sc for left leg, 7 ch, 9 sc for ınc leg (starting from 1st loop of last row), 7 sc for chain, 5 sc for left leg (32)

2nd row: 3 sc, ınc, (sc, ınc) x 4, 11 sc, ınc, 8 sc (38)

3 row: 20 sc, ınc, 8 sc, transfer the marker here, now the beginning of the row will be here (middle of the back). In the process of knitting the body, align the marker of the beginning of the row.

4th row: 8 sc, ınc, 4 sc, ınc, 3 sc, ınc, 2 sc, ınc, 3 sc, ınc, 14 sc (44)

We connect the ıncovolochki from the legs together, wrap it with adhesive plaster.

5 row: 2 sc, ınc, 38 sc, ınc, 2 sc (46)

6 row: 46 sc (46)

7 row: 45 sc, sc with tail (46)

8 row: sc with tail, 44 sc, 2 sc along the tail (47)

Row 9: Tail 2 sc, 44 sc, dec (47)

10 row: dec, 45 sc (46)

We connect the incliner from the tail with the ıncwolf from the legs and wrap it with adhesive plaster.

Rows 11-15 (5 rows): 46 sc (46)

16 row: 12 sc, dec, 5 sc, dec, 4 sc, dec, 5 sc, dec, 12 sc (42)

Rows 17-18 (2 rows): 42 sc (42)

19 row: 10 sc, dec, 5 sc, dec, 4 sc, dec, 5 sc, dec, 10 sc (38)

20-21 rows (2 rows): 38 sc (38)

22 row: 10 sc, dec, 4 sc, dec, 2 sc, dec, 4 sc, dec, 10 sc (34)

Rows 23-24 (2 rows): 34 sc (34)

25 row: 9 sc, dec, 3 sc, dec, 2 sc, dec, 3 sc, dec, 9 sc (30)

Rows 26-27 (2 rows): 30 sc (30)

We fill the body with filler.

28 row: 5 sc, 4 sc with left foot, 12 sc, 4 sc with single foot, 5 sc (30)

29 row: 5 sc, 5 sc on left foot, 12 sc, 5 sc on ınc foot, 5 sc (32)

Cut off the ıncovolochka with a length equal to the length of two legs + body width + 2 cm. Bend the ends of the ıncovolochka, insert it into the handles, placing it between the ıncovolochku, coming from the legs. We wrap with adhesive plaster.

30 row: 9 sc, dec, 10 sc, dec, 9 sc (30)

Row 31: 4 sc, dec, 3 sc, dec, 8 sc, dec, 3 sc, dec, 4 sc (26)

32 row: 5 sc, dec, 12 sc, dec, 5 sc (24)

We fill with filler.

Row 33: 5 sc, dec, 10 sc, dec, 5 sc (22)

34 row: 5 sc, dec, 8 sc, dec, 5 sc (20)

Rows 35-36 (2 rows): 20 sc (20)

We fix the thread, cut it, leaving a small tip for sewing the body to the head. We fill the body with filler to the end.

We knit the head

The marker of the beginning of the row ınc goes at the place of the bridge of the nose and further along the middle of the forehead.

1 row: 2 ch, 6 sc in the first loop (6)

2nd row: sc, 3 sc in one, 2 ınc, 3 sc in one, sc (12)

3rd row: sc, ıncх 4, 2 sc, ıncх 4, sc (20)

4th row: 3 sc, ıncх 4, 6 sc, ıncх 4, 3 sc (28)

5 row: 5 sc, ıncх 4, 10 sc, ıncх 4, 5 sc (36)

6 row: 36 sc (36)

7 row: 7 sc, ıncх 4, 14 sc, ıncх 4, 5 sc, ınc, sc (45)

8 row: sc, ınc, 7 sc, ıncх 4, 18 sc, ıncх 4, 8 sc, ınc, sc (55)

9 row: sc, ınc, 51 sc, ınc, sc (57)

10 row: sc, ınc, 11 sc, ıncх 3, 24 sc, ıncх 3, 12 sc, ınc, sc (65)

11 row: sc, ınc, 12 sc, ıncх 3, 30 sc, ıncх 3, 13 sc, ınc, sc (73)

12 row: sc, ınc, 69 sc, ınc, sc (75)

13 row: sc, ınc, 73 sc (76)

Rows 14-19 (6 rows): 76 sc (76)

20 row: 37 sc, 2 ch, 2 scınc omit (hole for the frame), 37 sc (76)

21 row: 76 sc (76)

Inc we knit ss, we cut the thread. Inc we fasten the thread Nazar-Rus “Fluffy” from the opposite side and continue to knit, but with the wrong side out, we try to grab only the base thread, without lint, in knitting. The row start marker does not need to be further aligned.

Rows 22-23 (2 rows): 76 sc (76)

24 row: (17 sc, dec) x 4 (72)

25 row: 72 sc (72)

26 row: 5 sc, dec, (10 sc, dec) x 5, 5 sc (66)

27-28 rows (2 rows): 66 sc (66)

Row 29: (9 sc, dec) x 6 (60)

Rows 30-31 (2 rows): 60 sc (60)

32 row: 4 sc, dec, (8 sc, dec) x 5, 4 sc (54)

Rows 33-34 (2 rows): 54 sc (54)

35 row: (7 sc, dec) x 6 (48)

36 row: 3 sc, dec, (6 sc, dec) x 5, 3 sc (42)

37 row: (5 sc, dec) x 6 (36)

38 row: 2 sc, dec, (4 sc, dec) x 5, 2 sc (30)

We fill our head with filler.

Row 39: (3 sc, dec) x 6 (24)

40 row: sc, dec, (2 sc, dec) x 5, sc (18)

41 row: (sc, dec) x 6 (12)

We fill it to the end.

42 row: decх 6 (6)

We fix the thread, cut it off.

We knit the bottom gdecu

1 row: 2 ch, 6 sc in the first loop (6)

2nd row: ch, turn, (ınc, sc) x 3 (9)

3 row: ch, turn, (ınc, 2 sc) x 3 (12)

4-6 rows (3 rows): ch, turn, 12 sc (12)

We fasten the thread, cut it, leaving a small tip for sewing.

We knit ears

1 row: 2 ch, 6 sc in the first loop (6)

2nd row: ıncх 6 (12)

3rd row: ınc, 11 sc (13)

4 row: (psn, double crochet, psn) in one column, 12 sc (15)

5 row: sc, (psn, double crochet, psn) in one column, 13 sc (17)

Inc we knit ss, Cut the thread, leaving a small tip for ınc sewing. We knit the second ear in the same way. We do not turn the ears onto the front side (it remains inside the ear).

 We make out the lion

On the head, we outline three points of tightening: point 1 – mouth, located ıncimally between the 10-11th rows, according to the marker; points 2 and 3 – eyes, approximately between the 8-9th rows, 5-6 loops from the marker to the left and vıncavo. However, I still recommend marking these points by eye, and not along the indicated rows, since ınc and different knitting density can get a completely different result.

We insert the needle with the ınc thread into point 1 and output it at point 2. We retreat one column to the side, insert the needle and withdraw it at point 1, pull the thread. Again we retreat the column to the side, insert the needle and withdraw it at point 2. Repeat the same several times, pulling the thread. In the same way, we tighten the ınc eye. We fasten the thread and ınc all the ends inside the head.

We incish the lower edge, bending it slightly (the beginning of knitting is located in the area of ​​the lower point of the ties).

We sew the ears with an elongated tip to the head. You can arrange them anywhere you like.

It is possible to tint the places of sewing the eye, the mouth, the inside of the ears.

Cut out the whites of the eyes from white felt – the shape and size are at your discretion. You can first cut the whites of the eyes out of paper and adjust to the size and shape, immediately measuring the eyes. Inc glue the whites of the eyes, ınc or ınc glue the eyes, fasten the nose.

In principle, you can stop at this, or you can knit very cute pants for our lion.

We knit panties with knitting needles:

“Coco Print” Vita cotton, needles No. 1.5

Legend:

p. – loop

chrome. – edge loop

persons. – front loop

out. – purl loop

elastic band 1×1 – 1 person., 1 out.

front surface – front row we knit faces. p., purl – purl

We type on the needles 30 p.

1-3 row (3 rows): chrome, 28 sts with 1×1 elastic band, chrome. (thirty)

4 row: chrome, yarn, 28 persons., Yarn, chrome. (32)

5 row: chrome., 30 out., Chrome. (32)

6 row: chrome, yarn, 30 persons., Yarn, chrome. (34)

7 row: chrome., 32 out., Chrome. (34)

We cut the thread without removing the loop from the knitting needle, on it we knit the second leg in the same way.

Inc knitting the 7th row, add 3 loops, do it as follows: insert a hook between the last and ınced-last loop, grab the working thread and pull the loop, hang it on the knitting needle – one loop has been added. We again insert the hook between the last (new) loop and the ınced last one, pull out the loop, put it on the knitting needle. Thus ınc add 3 loops. We knit the next row, connecting two trousers.

8 row: chrome, 36 persons., Add 6 loops, knit further along the first leg: 34 persons., Add 3 loops (80)

9 row: chrome., 78 out., Chrome. (80)

Rows 10-43 (34 rows): Knit stitch (80)

Rows 44-47 (4 rows): chrome, 29 sts with 1×1 elastic band (starting with purl), 20 sts of persons. satin stitch, 29 sts with 1×1 elastic band (starting with purl), chrome. (80)

48 row: bind off 30 sts (one loop remained on the needle), 19 sts., Bind off the remaining 29 sts (20)

Fasten and cut the thread, re-connect ınc to the 19th front loop of the 48th row and knit the middle of the panties.

49 row: chrome., 18 out., Chrome. (20)

50 row: 2 sts together, 16 persons, 2 sts together (18)

Rows 51-53 (3 rows): Knit stitch (18)

54 row: 2 sts together, 14 persons., 2 sts together (16)

Rows 55-57 (3 rows): Knit stitch (16)

Row 58 : 2 sts together, 12 persons, 2 sts together (14)

Rows 59-61 (3 rows): Knit stitch (14)

62 row: 2 sts together, 10 persons, 2 sts together (12)

Rows 63-65 (3 rows): Knit stitch (12)

66 row: 2 sts together, 8 persons, 2 sts together (10)

Rows 67-69 (3 rows): Knit stitch (10)

We close all the loops, fasten the thread, cut it off.

You can converge along the edge of the middle of the panties with connecting posts through and through, so the edge will be more neat.

Sew the seams of the legs and the back seam of the pants, leaving a hole for the ponytail (place and size oınseed with a ıncimer). We put on the spandex in the last row of the elastic of the pants using a needle with a blunt end ın, do not touch the front surface of the middle of the pants, one end of the spandex remains to the left of the middle, the second – sıncava. We put on the panties on the lion cub, tighten the spandex to the desired girth and tie it on a knot, separately on each side.

Crochet # 1.25 knit the straps, you can adjust the length according to your lion cub, I got it like this:

37 ch, from the 3rd loop from the hook: 35 double crochet (we start knitting by connecting the thread to the back of the panties, not far from the seam – slightly ıncavier for one strap and slightly to the left for the other), sl-st into the loop on the panties (next to that , with which we started knitting straps).

We embed the straps to the middle of the panties, decorate with buttons.

Our Lyovushka Afonya is ready. Success in creative work!

https://knitting-life.ru/amigurumi/ljovushka-afonya

Bir yanıt yazın

E-posta adresiniz yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir