Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day.
Master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
We can say that Christmas time is approaching now, so I wanted to present you the santa claus amigurumi toy.
You can prepare wonderful crochet handmade amigurumi dolls for your children at Christmas time.
To create a step by step crochet amigurumi pattern, you must follow the instructions completely.
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Christmas Set Gnomes, Free Crochet Pattern, I want to give you some information about this pattern;
ABBREVIATIONS:
ch – chain stitch
sc – single crochet
hdc – half double crochet
dc – double crochet
trc – treble crochet
sl st – slip stitch
inc – increase, 2 sc in the next sc
dec – decrease, single crochet 2 stitches together
(16) – number of stitches in a round
(inc, sc)*N – repeat N times
BLO – back loop only
FLO – front loop only
3dcCL – a cluster of 3 double stitches:
A cluster of stitches, made into the same stitch or chain space that are joined together at the top:
- Yarn over, insert hook into stitch and pull up a loop. Yarn over, pull through two. (This is essentially
completing the first half of one double crochet stitch.) - Repeat number one in the same stitch/space until you have a total of 4 loops on your hook.
- Yarn over, pull through all 4 loops at once.
Finish the round in an invisible way:
Thread the end of yarn through the needle, skip one stitch and guide the yarn into the next stitch as shown on the photo.
Insert the needle back in the same stitch where the yarn end is coming from. Pull the yarn and fasten the obtained stitch on the wrong side of detail.
1) TREE GNOME:
MATERIALS NEEDED:
- YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m
(weight 2 Fine yarn, 1,76 oz/174 yds), next colors:
• green № 63
• yellow № 35
• pink № 59
• turquoise № 76
• nude № 05 - Crochet hook 2 mm or 2.25 mm (US: B, UK:14)
- Fiberfill, thick sewing needle, pins.
- Piece of cardboard 3 on 3 inch for gnome’s base.
- Some semi wool yarn any thickness for beard.
If you follow this advice your gnomes will be 23 cm/8 inch.
BODY:
With green yarn.
Start with making a round base. Work in continuous rounds without slip stitches.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, sc)7 (21) Rnd 4: (inc, 2 sc)7 (28)
Rnd 5: (inc, 3 sc)7 (35) Rnd 6: (inc, 4 sc)7 (42)
Rnd 7: (inc, 5 sc)*7 (49)
Сut off the base of cardboard.
Rnd 8: BLO 49 sc
Rnd 9-17: sc in each stitch around 9 rounds
Insert the cardboard base.
Rnd 18: dec, 47 sc (48)
Rnd 19: (dec, 14 sc)3 (45) Rnd 20: 45 sc Rnd 21: (dec, 13 sc)3 (42)
Rnd 22: BLO 42 sc
Rnd 23: (dec, 5 sc)6 (36) Rnd 24: (dec, 4 sc)6 (30)
Rnd 25: (dec, 3 sc)6 (24) Rnd 26: (dec, 2 sc)6 (18)
Stuff the body evenly and firmly with the fiberfill.
Rnd 27: (dec, 1 sc)*6 (12)
Add some more fiberfill.
Rnd 28: 6 dec (6)
Cut off the yarn, leave a long tail.
Close the top using a needle, hide the tail into the body.
HAT:
With green yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in the MR
Rnd 2: 6 sc
Rnd 3: (inc, sc)3 (9) Rnd 4: 9 sc Rnd 5: (inc, 2 sc)3 (12)
Rnd 6: 12 sc
Rnd 7: (inc, 3 sc)3 (15) Rnd 8: 15 sc Rnd 9: (inc, 4 sc)3 (18)
Rnd 10: 18 sc
Rnd 11: (inc, 5 sc)3 (21) Rnd 12: 21 sc Rnd 13: (inc, 6 sc)3 (24)
Rnd 14: 24 sc
Rnd 15: (inc, 7 sc)3 (27) Rnd 16: 27 sc Rnd 17: (inc, 8 sc)3 (30)
Rnd 18: 30 sc
Rnd 19: (inc, 9 sc)3 (33) Rnd 20: 33 sc Rnd 21: (inc, 10 sc)3 (36)
Rnd 22: 36 sc
Rnd 23: (inc, 11 sc)3 (39) Rnd 24: BLO 39 sc Rnd 25: (inc, 12 sc)3 (42)
Rnd 26: 42 sc
Rnd 27: (inc, 6 sc)6 (48) Rnd 28: BLO 48 sc Rnd 29: (inc, 7 sc)6 (54)
Rnd 30: 54 sc
Rnd 31: (inc, 8 sc)6 (60) Rnd 32: BLO 60 sc Rnd 33: (inc, 9 sc)6 (66)
Rnd 34: 66 sc
Cut off the yarn.
Finish the round in an invisible way:
Connect green yarn to the free front loops of of 23, 27, 31-th rounds and crochet 3 sc in each
stitch around. Cut off the yarn, hide the tail.
STAR:
With yellow yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in the MR
Rnd 2: 6 inc (12)
Rnd 3: (inc, 1 sc)6 (18) Rnd 4: (inc, 2 sc)6 (24)
Rnd 5: inc, marker in this stitch.
Start to crochet first star ray:
Rnd 1: 5 sc, turn (5)
Rnd 2: ch 1, dec, 3 sc, turn (4)
Rnd 3: ch 1, dec, 2 sc, turn (3)
Rnd 4: ch 1, dec, 1 sc, turn (2)
Rnd 5: ch 1, dec (1)
Cut off the yarn, hide the tail.
Connect yarn to the 6-th stitch of 5-th round and repeat
Rnd 1-5 for the star ray.
Connect yarn to the 11-th stitch of 5-th round and repeat
Rnd 1-5 for the star ray.
Connect yarn to the 16-th stitch of 5-th round and repeat
Rnd 1-5 for the star ray.
Connect yarn to the 21-th stitch of 5-th round and repeat
Rnd 1-5 for the star ray.
Make 2 stars.
Begin attaching the stars together by inserting your hook through both stars.
Single crochet around the outside edge of star in yellow. Make increases on the ray’s ends. At the distance between the last rays stitch through front pieces only.
Cut off the yarn, hide the tail. Put the star on the hat.
MİNİ BALLS (make6):
With pink and turquoise yarns.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in MR
Rnd 2: 6 inc (12)
Rnd 3: 12 sc
Rnd 4: 6 dec (6)
Cut off the yarn, leave a long tail. Add some fiberfill.
Close the top using a needle, sew to the hat.
ARMS:
Start with yellow yarn.
Rnd 1: 8 sc in the MR, go on in rounds without sl st.
Rnd 2: (inc, 3 sc)*2 (10)
Rnd 3: 10 sc
Rnd 4: 4 sc, 3dcCL, 5 sc (10)
(3dcCL – a cluster of 3 dc)
Rnd 5: 10 sc
Connect green yarn:
Rnd 6: BLO 10 sc
Rnd 7-11: sc in each stitch around 5 rounds.
Stuff the bottom part of the arm (hand) with fiberfill.
Don’t stuff the top part of the arm so they don’t stick out. Fold so that the stitches of the last round line
each other. Crochet the opposite stitches with 4-5 sc.
Cut off the yarn, leave a long tail for sewing.
NOSE:
With nude yarn.
Rnd 1: 7 sc in the MR, go on in continuous rounds without sl st.
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)7 (21) Rnd 4: 21 sc Rnd 5: (dec, 1 sc)7 (14)
Rnd 6: 7 dec (7)
Add some fiberfill. Close the top using a needle.
ASSEMBLY AND DECORATION:
For beard tie a pieces of yarn to the free 10 loops of 21 round. Use pet brush.
Attach the arms, and nose to the body with some pins to the free loops of 21th round.
Put on the hat. The top of arms and nose should be placed under the hat. Move them the way you like.
Take off the hat, sew the arms and nose to the body.
Put on the hat and attach it with simple stitches in 2-3 places.
(Congratulations! Your Gnome is ready)
2) ORNAMENT GNOME:
MATERIALS NEEDED:
- YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m (weight
2 Fine yarn, 1,76 oz/174 yds), next colors:
• pink № 59
• white № 01
• yellow № 35
• green № 63
• turquoise № 76
• nude № 05 - Crochet hook 2 mm or 2.25 mm (US: B, UK:14)
- Fiberfill, thick sewing needle, pins.
- Piece of cardboard 3 on 3 inch for one gnome’s base.
- Some semi wool yarn any thickness for pigtails.
If you follow this advice your gnomes will be 21 cm/7 inch.
BODY:
With white yarn.
Start with making a round base. Work in continuous rounds
without slip stitches.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, sc)7 (21) Rnd 4: (inc, 2 sc)7 (28)
Rnd 5: (inc, 3 sc)7 (35) Rnd 6: (inc, 4 sc)7 (42)
Rnd 7: (inc, 5 sc)*7 (49)
Сut off the base of cardboard.
Rnd 8: BLO 49 sc
Rnd 9-19: sc in each stitch around 11 rounds
Insert the cardboard base.
Rnd 20: dec, 47 sc (48)
Rnd 21: (dec, 14 sc)3 (45) Rnd 22: 45 sc Rnd 23: (dec, 13 sc)3 (42)
Rnd 24: BLO 42 sc
Rnd 25: (dec, 5 sc)6 (36) Rnd 26: (dec, 4 sc)6 (30)
Rnd 27: (dec, 3 sc)6 (24) Rnd 28: (dec, 2 sc)6 (18)
Stuff the body evenly and firmly with the fiberfill.
Rnd 29: (dec, 1 sc)*6 (12)
Add some more fiberfill.
Rnd 30: 6 dec (6)
Cut off the yarn, leave a long tail.
Close the top using a needle, hide the tail into the body.
HAT:
Start with pink yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in the MR
Rnd 2: 6 sc
Rnd 3: (inc, sc)3 (9) Rnd 4: 9 sc Rnd 5: (inc, 2 sc)3 (12)
Rnd 6: 12 sc
Rnd 7: (inc, 3 sc)3 (15) Rnd 8: 15 sc Rnd 9: (inc, 4 sc)3 (18)
Rnd 10: 18 sc
Rnd 11: (inc, 5 sc)3 (21) Rnd 12: 21 sc Rnd 13: (inc, 6 sc)3 (24)
Rnd 14: 24 sc
Rnd 15: (inc, 7 sc)3 (27) Rnd 16: 27 sc Rnd 17: (inc, 8 sc)3 (30)
Rnd 18: 30 sc
Rnd 19: (inc, 9 sc)3 (33) Rnd 20: 33 sc Rnd 21: (inc, 10 sc)3 (36)
Rnd 22: 36 sc
Connect green yarn (cut off pink one):
Rnd 23: FLO (inc, 5 sc)6 (42) Connect turquoise yarn (don’t cut off green one): Rnd 24: (inc, 6 sc)6 (48)
Connect white yarn (don’t cut off turquoise one):
Rnd 25: (inc, 7 sc)6 (54) With green yarn (don’t cut off white one): Rnd 26: (inc, 8 sc)6 (60)
Rnd 27: (inc, 9 sc)*6 (66)
With turquoise yarn (don’t cut off green one):
Rnd 28: 66 sc
Connect yellow and white yarn:
Rnd 29: with yellow yarn 1 sc, with white yarn 1 sc, repeat to the end of round. (66)
With turquoise yarn (cut off yellow one):
Rnd 30: 66 sc
With green yarn (don’t cut off turquoise one):
Rnd 31: (dec, 9 sc)6 (60) Rnd 32: (dec, 8 sc)6 (54)
With white yarn (don’t cut off green one):
Rnd 33: (dec, 7 sc)6 (48) With turquoise yarn (cut off white one): Rnd 34: (dec, 6 sc)6 (42)
With green yarn (cut off turquoise one):
Rnd 35: 42 sc
Connect pink yarn (cut off green one):
Rnd 36: FLO 3 sc, (inc, 6 sc)5, inc, 3 sc (48) Rnd 37: (inc, 7 sc)6 (54)
Rnd 38: 4 sc, (inc, 8 sc)5, inc, 4 sc (60) Rnd 39: (inc, 9 sc)6 (66)
Rnd 40: 66 sc
Cut off the yarn. Finish the round in an invisible way:
Add some fiberfill into the hat.
ARMS:
Start with the turquoise yarn.
Rnd 1: 8 sc in the MR, go on in rounds without sl st.
Rnd 2: (inc, 3 sc)*2 (10)
Rnd 3: 10 sc
Rnd 4: 4 sc, 3dcCL, 5 sc (10)
(3dcCL – a cluster of 3 dc)
Rnd 5: 10 sc
Connect white yarn:
Rnd 6: BLO 10 sc
Rnd 7-14: sc in each stitch around 8 rounds.
Stuff the bottom part of the arm (hand) with fiberfill. Don’t stuff the top part of the arm so they don’t
stick out. Fold so that the stitches of the last round line each other.
Crochet the opposite stitches with 4-5 sc.
Cut off the yarn, leave a long tail for sewing.
NOSE:
With nude yarn.
Rnd 1: 7 sc in the MR, go on in continuous rounds without sl st.
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)7 (21) Rnd 4: 21 sc Rnd 5: (dec, 1 sc)7 (14)
Rnd 6: 7 dec (7)
Add some fiberfill.
Close the top using a needle.
ASSEMBLY AND DECORATIONS:
For pigtails tie a pieces of yarn to the free 5 loops of 23 round, repeat for second pigtail. Distance between pigtails 3 sc. Use pet brush.
Attach the arms, and nose to the body with some pins to the free loops of 23th round.
Put on the hat. The top of arms and nose should be placed under the hat. Move them the way you like.
Take off the hat, sew the arms and nose to the body.
Put on the hat and attach it with simple stitches in 2-3 places.
(Congratulations! Your Gnome is ready)
3) BAUBLE GNOME:
MATERIALS NEEDED:
- YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m, next colors:
• pink № 59
• white № 01
• yellow № 35
• green № 63
• turquoise № 76
• nude № 05 - Crochet hook 2 mm or 2.25 mm (US: B, UK:14)
- Fiberfill, thick sewing needle, pins.
- Piece of cardboard approx. 3 on 3 inch for gnome’s base.
- Some semi wool yarn any thickness for beard.
If you follow this advice your gnomes will be 20 cm/7 inch.
BODY:
With pink yarn.
Start with making a round base. Work in continuous rounds without sl st.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, sc)7 (21) Rnd 4: (inc, 2 sc)7 (28)
Rnd 5: (inc, 3 sc)7 (35) Rnd 6: (inc, 4 sc)7 (42)
Rnd 7: (inc, 5 sc)7 (49) Сut off the base of cardboard. Rnd 8: BLO 49 sc Rnd 9-19: sc in each stitch around 11 rounds Insert the cardboard base. Rnd 20: dec, 47 sc (48) Rnd 21: (dec, 14 sc)3 (45)
Rnd 22: 45 sc
Rnd 23: (dec, 13 sc)3 (42) Rnd 24: BLO 42 sc Rnd 25: (dec, 5 sc)6 (36)
Rnd 26: (dec, 4 sc)6 (30) Rnd 27: (dec, 3 sc)6 (24)
Rnd 28: (dec, 2 sc)6 (18) Stuff the body evenly and firmly with the fiberfill. Rnd 29: (dec, 1 sc)6 (12)
Add some more fiberfill.
Rnd 30: 6 dec (6)
Cut off the yarn, leave a long tail.
Close the top using a needle, hide the tail into the body.
HAT:
Start with white yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in the MR
Rnd 2: 6 inc (12)
Rnd 3: (inc, 1 sc)6 (18) Rnd 4: (inc, 2 sc)6 (24)
Rnd 5: (inc, 3 sc)6 (30) Rnd 6: (inc, 4 sc)6 (36)
Rnd 7: (inc, 5 sc)6 (42) Connect pink yarn (don’t cut off white one): Rnd 8: (inc, 6 sc)6 (48)
With white yarn (cut off pink one):
Rnd 9: (inc, 7 sc)6 (54) Connect turquoise yarn (don’t cut off white one): Rnd 10: (inc, 8 sc)6 (60)
Rnd 11: (inc, 9 sc)6 (66) Rnd 12: (inc, 10 sc)6 (72)
With white yarn (don’t cut off turquoise one):
Rnd 13-19: sc in each stitch around 7 rounds.
With turquoise yarn (don’t cut off white one):
Rnd 20-22: sc in each stitch around 3 rounds.
With white yarn (cut off turquoise one):
Rnd 23: (dec, 10 sc)6 (66) Connect pink yarn (don’t cut off white one): Rnd 24: (dec, 9 sc)6 (60)
With white yarn (cut off pink one):
Rnd 25: (dec, 8 sc)6 (54) Connect green yarn (cut off white one): Rnd 26: 4 sc, (inc, 8 sc)5, inc, 4 sc (60)
Rnd 27: (inc, 9 sc)*6 (66)
Rnd 28: 66 sc
Cut off the yarn.
Finish the round in an invisible way:
Top of bauble.
With yellow yarn.
Rnd 1: 7 sc in the MR, go on in continuous rounds without sl st.
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)*7 (21)
Rnd 4: BLO 21 sc
Rnd 5-6: sc in each stitch around 2 rounds.
Cut off the yarn. Add some fiberfill.
Sew to the top of hat.
Crochet Ch 25, sew the tails to the top.
Embroider the hat with green yarn as shown on the photo.
ARMS:
Start with white yarn.
Rnd 1: 8 sc in the MR, go on in continuous rounds without sl st.
Rnd 2: (inc, 3 sc)*2 (10)
Rnd 3: 10 sc
Rnd 4: 4 sc, 3dcCL, 5 sc (10)
(3dcCL – a cluster of 3 dc)
Rnd 5: 10 sc
Connect pink yarn:
Rnd 6: BLO 10 sc
Rnd 7-14: sc in each stitch around 8 rounds.
Stuff the bottom part of the arm (hand) with fiberfill. Don’t stuff the top part of the arm so they don’t
stick out.
Fold so that the stitches of the last round line each other.
Crochet the opposite stitches with 4-5 sc.
Cut off the yarn, leave a long tail for sewing.
NOSE:
With nude yarn.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)7 (21) Rnd 4: 21 sc Rnd 5: (dec, 1 sc)7 (14)
Rnd 6: 7 dec (7)
Add some fiberfill.
Close the top using a needle.
ASSEMBLY AND GNOME:
For beard cut off semi wool yarn, tie a piece of yarn to the free 10 loops of 23 round. Use pet brush.
Attach the arms, and nose to the body with some pins to the free loops of 23th round.
Put on the hat. The top of arms and nose should be placed under the hat. Move them the way you like.
Take off the hat, sew the arms and nose to the body.
Put on the hat and attach it with 2-3 simple stitches from each side.
(Congratulations! Your Gnome is ready)
FINISH!
