Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Christmas Gnome Free Crochet Pattern, I want to give you some information about this pattern;
Abbreviations:
ch – chain stitch
sc – single crochet
hdc – half double crochet
dc – double crochet
sl st – slip stitch
inc – increase, 2 sc in the next sc
dec – decrease, single crochet 2 stitches together
(16) – number of stitches in a round
(inc, sc)*N – repeat N times
BLO – back loop only
FLO – front loop only
3dcCL – a cluster of 3 double stitches:
A cluster of stitches, made into the same stitch or chain
space that are joined together at the top:
- Yarn over, insert hook into stitch and pull up a loop.
Yarn over, pull through two. (This is essentially
completing the first half of one double crochet stitch.) - Repeat number one in the same stitch/space until you
have a total of 4 loops on your hook. - Yarn over, pull through all 4 loops at once.
Poinsettia Gnome.
Materials needed:
- YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m, next
colors:
• for body – brown № 40, turquoise № 76
• for hat – green № 69, red № 90
• for nose – nude № 05
• for arms – white № 01 - Crochet hook 2 mm or 2.25 mm (US: B, UK:14)
- Fiberfill, thick sewing needle, pins.
- Piece of cardboard 3 on 3 inch for gnome’s base.
- Some semi wool yarn any thickness for beard.
If you follow this advice your gnomes will be 17 cm/6.7
inch.
1.Body
With brown yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, sc)7 (21) Rnd 4: (inc, 2 sc)7 (28)
Rnd 5: (inc, 3 sc)7 (35) Rnd 6: (inc, 4 sc)7 (42)
Rnd 7: (inc, 5 sc)7 (49) Сut off the base of cardboard. Rnd 8: BLO 49 sc Rnd 9: 49 sc Connect turquoise yarn (don’t cut off the brown one): Rnd 10: 49 sc Rnd 11: change yarn color for each stitch: 1 sc with turquoise yarn, 1 sc with brown yarn. Repeat to the end of round. (49) With brown yarn (cut off the turquoise one): Rnd 12-19: sc in each stitch around 8 rounds Insert the cardboard base. Rnd 20: dec, 47 sc (48) Rnd 21: (dec, 14 sc)3 (45)
Rnd 22: 45 sc
Rnd 23: (dec, 13 sc)3 (42) Rnd 24: BLO 42 sc Rnd 25: (dec, 5 sc)6 (36)
Rnd 26: (dec, 4 sc)6 (30) Rnd 27: (dec, 3 sc)6 (24)
Rnd 28: (dec, 2 sc)6 (18) Stuff the body evenly and firmly with the fiberfill. Rnd 29: (dec, 1 sc)6 (12)
Add some more fiberfill.
Rnd 30: 6 dec (6)
Cut off the yarn, leave a long tail.
Close the top using a needle, hide the
tail into the body.
2.Hat
Start with red yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in the MR
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc)6 (18) Rnd 4: (2 sc, inc)6 (24)
Rnd 5: (3 sc, inc)6 (30) Rnd 6: (inc, 4 sc)6 (36)
Connect green yarn (cut off red one):
Rnd 7: 36 sc
Rnd 8: (5 sc, inc)6 (42) Rnd 9: 42 sc Rnd 10: (6 sc, inc)6 (48)
Rnd 11: 48 sc
Rnd 12: (7 sc, inc)6 (54) Rnd 13-15: sc in each st around 3 rounds. Rnd 16: (8 sc, inc)6 (60)
Rnd 17-18: sc in each st around 2 rounds.
Rnd 19: (9 sc, inc)*6 (66)
Rnd 20-21: sc in each st around 2 rounds.
Cut off the yarn.
Finish the round in an invisible way:
Thread the end of yarn through the needle, skip one stitch
and guide the yarn into the next stitch as shown on the
photo.
Insert the needle back in the same stitch where the yarn
end is coming from. Pull the yarn and fasten the obtained
stitch on the wrong side of detail.
Leaves.
Make 9 green and 10 red leaves.
Ch 11, start in 2nd loop from the hook, 9 sc, 4 sc in last
stitch, work along the other side of the foundation chain:
9 sc, 4 sc in next stitch,
8 sc, turn,
2 sl st in next 2
stitches, ch 1, 5
hdc,
3 inc (2 sc in each stitch) in next 3
stitches,
8 sc, turn, 2 sl st, ch 1, 5 hdc, 2 sc, 1 sl st
Cut off the yarn.
Sew all 9 green
leaves to the hat.
Sew 5 red leaves to the hat as shown on
the photo.
Fold another red leaves as shown on
the photo and sew together. Sew to the
top of hat.
Add some fiberfill into the hat.
3.Arms
Start with the white yarn.
Rnd 1: 8 sc in the MR, go on in rounds without sl st.
Rnd 2: (inc, 3 sc)*2 (10)
Rnd 3: 10 sc
Rnd 4: 4 sc, 3dcCL, 5 sc (10)
(3dcCL – a cluster of 3 dc
Rnd 5: 10 sc
Connect brown yarn:
Rnd 6: BLO 10 sc
Rnd 7-13: sc in each stitch around 7 rounds.
Stuff the bottom part of the arm (hand) with fiberfill.
Don’t stuff the top part of the arm so they don’t stick
out.
Fold so that the stitches of the last round line each
other.
Crochet the opposite stitches with 4-5 sc.
Cut off the yarn, leave a long tail for sewing.
4.Nose
With nude yarn.
Rnd 1: 7 sc in the MR, go on in continuous rounds without
sl st.
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)7 (21) Rnd 4: 21 sc Rnd 5: (dec, 1 sc)7 (14)
Rnd 6: 7 dec (7)
Add some fiberfill.
Close the top using a needle.
5.Assembly and decoration
For beard tie a pieces of yarn to the free 10 loops of 23
round. Use pet brush.
Attach the arms, and nose to the body with some pins to
the free loops of 23th round.
Put on the hat. The top of arms and nose should be placed
under the hat. Move them the way you like.
Take off the hat, sew the arms and nose to the body.
Put on the hat and attach it with simple stitches in 2-3
places.
Congratulations! Your Gnome is ready)
Christmas Globe Gnome
Materials needed:
- YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m, next
colors:
• for body – grey № 49
• for hat – turquoise № 76, red № 90, white № 01
• for nose – nude № 05
• for arms and décor – white № 01, brown № 40,
green № 69, orange № 85 - Crochet hook 2 mm or 2.25 mm (US: B, UK:14)
- Fiberfill, thick sewing needle, pins.
- Piece of cardboard 3 on 3 inch for one gnome’s base.
- Some semi wool yarn any thickness for beard.
If you follow this advice your gnomes will be 20 cm/7 inch.
1.Body
With grey yarn.
Start with making a round base. Work in continuous rounds
without slip stitches.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, sc)7 (21) Rnd 4: (inc, 2 sc)7 (28)
Rnd 5: (inc, 3 sc)7 (35) Rnd 6: (inc, 4 sc)7 (42)
Rnd 7: (inc, 5 sc)7 (49) Сut off the base of cardboard. Rnd 8: BLO 49 sc Rnd 9-19: sc in each stitch around 11 rounds Insert the cardboard base. Rnd 20: dec, 47 sc (48) Rnd 21: (dec, 14 sc)3 (45)
Rnd 22: 45 sc
Rnd 23: (dec, 13 sc)3 (42) Rnd 24: BLO 42 sc Rnd 25: (dec, 5 sc)6 (36)
Rnd 26: (dec, 4 sc)6 (30) Rnd 27: (dec, 3 sc)6 (24)
Rnd 28: (dec, 2 sc)6 (18) Stuff the body evenly and firmly with the fiberfill. Rnd 29: (dec, 1 sc)6 (12)
Add some more fiberfill.
Rnd 30: 6 dec (6)
Cut off the yarn, leave a long tail.
Close the top using a needle, hide
the tail into the body
2.Hat
Start with turquiose yarn.
Work in continuous rounds without slip stitches.
Rnd 1: 6 sc in the MR
Rnd 2: 6 inc (12)
Rnd 3: (inc, 1 sc)6 (18) Rnd 4: (inc, 2 sc)6 (24)
Rnd 5: (inc, 3 sc)6 (30) Rnd 6: (inc, 4 sc)6 (36)
Rnd 7: (inc, 5 sc)6 (42) Rnd 8: (inc, 6 sc)6 (48)
Rnd 9: (inc, 7 sc)6 (54) Rnd 10: (inc, 8 sc)6 (60)
Rnd 11: (inc, 19 sc)3 (63) Rnd 12-19: sc in each stitch around 8 rounds. Connect white yarn (cut off the turquoise one): Rnd 20-22: sc in each stitch around 3 rounds. Rnd 23: (dec, 19 sc)3 (60)
Rnd 24: (dec, 8 sc)6 (54) Rnd 25: (dec, 7 sc)6 (48)
Connect red yarn (cut off the white
one):
Rnd 26: 48 sl st
Rnd 27: (inc, 7 sc)6 (54) Rnd 28: (inc, 8 sc)6 (60)
Rnd 29: (inc, 19 sc)3 (63) Rnd 30: (inc, 20 sc)3 (66)
Rnd 31: 66 sc
Cut off the yarn.
Finish the round in an invisible way:
Thread the end of yarn through the
needle, skip one stitch and guide the
yarn into the next stitch as shown on
the photo.
Insert the needle back in the same stitch where the yarn
end is coming from. Pull the yarn and fasten the obtained
stitch on the wrong side of detail.
Add some fiberfill into the hat.
Décor for hat.
- House.
With brown yarn.
Work in turning rows.
Row 1: ch 7, start in 2nd loop from the hook, 6 sc
Row 2-3: ch 1, 6 sc
Row 4: ch 1, dec, 2 sc, dec (4)
Row 5: ch 1, 2 dec (2)
Cut off the yarn, hide the tails. - Roof.
With white yarn.
Ch 12, start in 2nd loop from the hook, 5 sc, 3sc in
next stitch, 5 sc (13)
Cut off the yarn, hide the tails.
- Little Tree.
With green yarn.
Work in turning rows.
Row 1: ch 3, start in 3rd loop from the hook, 2 dc
Row 2: ch 2, 2 dc in each stitch (4)
Cut off the yarn, hide the tails.
- Big Tree.
With green yarn.
Work in turning rows.
Row 1: ch 3, start in 3rd loop from the hook, 2 dc
Row 2: ch 2, 2 dc in each stitch (4)
Row 3: ch 2, 3 dc in next 3 stitches, 2 dc in last
stitch (5)
Cut off the yarn, hide the tails. - Snowman.
With white yarn.
For small ball Rnd 1: 7 sc in the MR, 1 sl st
Cut off the yarn, hide the tails.
For big ball Rnd 1: 7 sc in the MR, 1 sl st
Rnd 2: 7 inc (14)
Cut off the yarn, hide the tails.
Sew the décor to the hat as shown on the photo.
Embroider the hat as shown on the photo.
3.Arms
Start with the white yarn.
Rnd 1: 8 sc in the MR, go on in rounds without sl st.
Rnd 2: (inc, 3 sc)*2 (10)
Rnd 3: 10 sc
Rnd 4: 4 sc, 3dcCL, 5 sc (10)
(3dcCL – a cluster of 3 dc)
Rnd 5: 10 sc
Connect grey yarn:
Rnd 6: BLO 10 sc
Rnd 7-13: sc in each stitch around 7 rounds.
Stuff the bottom part of the arm (hand) with fiberfill.
Don’t stuff the top part of the arm so they don’t stick
out.
Fold so that the stitches of the last round line each
other.
Crochet the opposite stitches with 4-5 sc.
Cut off the yarn, leave a long tail for sewing.
4.Nose
With nude yarn.
Rnd 1: 7 sc in the MR, go on in continuous rounds without
sl st.
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)7 (21) Rnd 4: 21 sc Rnd 5: (dec, 1 sc)7 (14)
Rnd 6: 7 dec (7)
Add some fiberfill.
Close the top using a needle
5.Assembly and decoration
For beard tie a pieces of yarn to the free 10 loops of 23
round. Use pet brush.
Attach the arms, and nose to the body with some pins to
the free loops of 23th round.
Put on the hat. The top of arms and nose should be placed
under the hat. Move them the way you like.
Take off the hat, sew the arms and nose to the body.
Put on the hat and attach it with simple stitches in 2-3
places.
Congratulations! Your Gnome is ready)
Mitten Gnome.
Materials needed:
- YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m, next
colors:
• for body – green № 69
• for hat – red № 90, white № 01
• for nose – nude № 05
• for décor – turquoise № 76
• Crochet hook 2 mm or 2.25 mm (US: B, UK:14) - Fiberfill, thick sewing needle, pins.
- Piece of cardboard 3 on 3 inch for one gnome’s base.
- Some semi wool yarn any thickness for pigtails.
If you follow this advice your gnomes will be 20 cm/7 inch.
1.Body
With green yarn.
Start with making a round base. Work in continuous rounds
without slip stitches.
Rnd 1: 7 sc in the MR
Rnd 2: 7 inc (14)
Rnd 3: (inc, sc)7 (21) Rnd 4: (inc, 2 sc)7 (28)
Rnd 5: (inc, 3 sc)7 (35) Rnd 6: (inc, 4 sc)7 (42)
Rnd 7: (inc, 5 sc)7 (49) Сut off the base of cardboard. Rnd 8: BLO 49 sc Rnd 9-19: sc in each stitch around 11 rounds Insert the cardboard base. Rnd 20: dec, 47 sc (48) Rnd 21: (dec, 14 sc)3 (45)
Rnd 22: 45 sc
Rnd 23: (dec, 13 sc)3 (42) Rnd 24: BLO 42 sc Rnd 25: (dec, 5 sc)6 (36)
Rnd 26: (dec, 4 sc)6 (30) Rnd 27: (dec, 3 sc)6 (24)
Rnd 28: (dec, 2 sc)6 (18) Stuff the body evenly and firmly with the fiberfill. Rnd 29: (dec, 1 sc)6 (12)
Add some more fiberfill.
Rnd 30: 6 dec (6)
Cut off the yarn, leave a long tail.
Close the top using a needle, hide the tail into the
body
2.Hat
With red yarn.
Work in continuous rounds without slip stitches.
Finger.
Rnd 1: 6 sc in the MR
Rnd 2: 6 inc (12)
Rnd 3-8: sc in each stitch around 6
rounds.
Stuff the bottom part of the finger
with fiberfill. Don’t stuff the top
part of the finger so it don’t stick
out.
Fold so that the stitches of the last
round line each other.
Crochet the opposite stitches with 6 sc.
Cut off the yarn, hide the tail.
Mitten.
Rnd 1: 6 sc in the MR
Rnd 2: 6 inc (12)
Rnd 3: (3 sc, 3 inc)2 (18) Rnd 4: (4 sc, inc, 1 sc, inc, 1 sc, inc)2 (24)
Rnd 5: (5 sc, inc, 2 sc, inc, 2 sc,
inc)*2 (30)
Rnd 6: 6 sc, inc, 2 sc, inc, 2 sc,
inc, 8 sc, inc, 2 sc, inc, 2
sc, inc, 2 sc (36)
Rnd 7: 7 sc, inc, 2 sc, inc, 2 sc, inc, 11 sc, inc, 2 sc,
inc, 2 sc, inc, 4 sc (42)
Rnd 8: 42 sc
Rnd 9: 8 sc, inc, 2 sc, inc, 2 sc, inc, 14 sc, inc, 2 sc,
inc, 2 sc, inc, 6 sc (48)
Rnd 10: 48 sc
Connect white yarn (don’t cut off the red one):
Rnd 11: 48 sc
Connect red yarn (cut off the white one):
Rnd 12: 12 sc, inc, 23 sc, inc, 11 sc (50)
Rnd 13-20: sc in each stitch around 8 rounds.
Rnd 21: 12 sc, dec, 23 sc, dec, 11 sc (48)
Rnd 22: 48 sc
Rnd 23: 12 sc, then crochet together
mitten and finger in next 6
sc, 30 sc (48)
Connect white yarn (don’t cut off the
red one):
Rnd 24: 48 sc
Connect red yarn (cut off the white
one):
Rnd 25: 48 sc
Rnd 26: FLO (inc, 7 sc)6 (54) Rnd 27: 4 sc, (inc, 8 sc)5, inc, 4 sc
(60)
Rnd 28: (inc, 19 sc)3 (63) Rnd 29: 10 sc, (inc, 20 sc)2, inc,
10 sc (66)
Rnd 30: 66 sc
Cut off the yarn.
Finish the round in an invisible way:
Thread the end of yarn through the needle, skip one stitch
and guide the yarn into the next stitch as shown on the
photo.
Insert the needle back in the same stitch where the yarn
end is coming from. Pull the yarn and fasten the obtained
stitch on the wrong side of detail.
Add some fiberfill into the hat.
Embroider the hat as shown on the photo. Sew the finger to
the hat.
3.Arms
Start with the white yarn.
Rnd 1: 8 sc in the MR, go on in rounds without sl st.
Rnd 2: (inc, 3 sc)*2 (10)
Rnd 3: 10 sc
Rnd 4: 4 sc, 3dcCL, 5 sc (10)
(3dcCL – a cluster of 3 dc
Rnd 5: 10 sc
Connect green yarn:
Rnd 6: BLO 10 sc
Rnd 7-13: sc in each stitch around 7 rounds.
Stuff the bottom part of the arm (hand) with fiberfill.
Don’t stuff the top part of the arm so they don’t stick
out.
Fold so that the stitches of the last round line each
other.
Crochet the opposite stitches with 4-5 sc.
Cut off the yarn, leave a long tail for sewing.
4.Nose
With nude yarn.
Rnd 1: 7 sc in the MR, go on in continuous rounds without
sl st.
Rnd 2: 7 inc (14)
Rnd 3: (inc, 1 sc)7 (21) Rnd 4: 21 sc Rnd 5: (dec, 1 sc)7 (14)
Rnd 6: 7 dec (7)
Add some fiberfill.
Close the top using a needle.
5.Assembly and decoration
For pigtails tie a pieces of yarn to the free 5 loops of
23 round, repeat for second pigtail. Distance between
pigtails 3 sc. Use pet brush.
Attach the arms, and nose to the body with some pins to
the free loops of 23th round.
Put on the hat. The top of arms and nose should be placed
under the hat. Move them the way you like.
Take off the hat, sew the arms
and nose to the body.
Put on the hat and attach it
with simple stitches in 2-3
places.
Congratulations! Your Gnome is ready)
