Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Christmas Bear Free Crochet Pattern, I want to give you some information about this pattern;

Material used:
- Yarn:
Nako Lily (100g – 180m, 100% polyester), color 6651 cream – 1 skein, for body
bears.
Alize Lanagold Classik (100g – 240m, 49% wool, 51% acrylic), color 55 white – 1
skein, for the foot
Alize Softy (50g – 115m, 100% micropolyester), color 55 white – 1 skein, for the nose
Alize Superlana klasik (100g – 280m, 25% wool, 75% acrylic), color 56 red – 1
skein, for coats and hats.
YarnArt Jeans (50g – 160m, 55% cotton, 45% acrylic), color 26 red – 1 skein, for
bag.
YarnArt Mink (50g – 75m, 100% polyamide), color 330 white – 1 skein, for coats and
caps.
Nako Mohair Delicate (100g – 500m, 40% mohair, 60% acrylic), color 6101 white – 1
skein, for pom-poms
- Filler (holofiber or sindipuh)
- Hook number 2.5
- Knitting needles No. 2.5 (5 pcs) and circular knitting needles on fishing line No. 2.5 – 2 pcs.
- Needle with a wide eye to sew parts
- Thick cardboard (plastic) for insoles (I use plastic covers for
cans) - Cotter pins (2.5 cm) and discs (20 mm) for attaching handles and legs
- White and blue buttons (11 mm) for a coat – 3 pcs
- Half beads with fastening, for the eyes (8 mm) – 2 pcs
- Spout with attachment, 20 mm wide, 15 mm high
- Scissors and wire cutters
- Yarn in the color of the body of the bear, for tightening the muzzle
- English clubs to hold the pieces together
Legend:
ch – air loop
slst – connecting column
sc – single crochet
inc – increase (knit 2 sc in 1 loop)
dec – decrease (knit 2 sc together)
- – repeat the specified number of times
The number in brackets at the end of each row of description indicates how much should be
stitches on this row.
Persons – front loop
purl – purl loop
k – edge (we remove the first loop, we knit the last loop)
inc – increase (we knit two from one loop, first for the front wall of the loop,
then behind)
dec – decrease (we knit two loops together)
Pin connection:
What is a splint connection, which is traditionally used in knitting
toys, in particular in bears.
This is such a connection that allows you to give mobility
arms and legs.
They can rotate freely, while the connection is very reliable.
To do in your toy
We need a splint connection: cotter pins
T-shaped, discs, pliers and toy parts.
Take a cotter pin, thread it into the disk and
we fix it in the first part of the toy.
Then in the second part we insert
cotter pin, put a disk on top and with
use pliers to twist the antennae
pin clockwise. Everything is very
simply



Foot (2 pcs):
White thread Alize Lanagold Classik:
1 row: dial 7 ch, starting from the 2nd
we knit loops from the hook: 5 sbn, 3 sbn in
the last loop, then we knit along
other side of the chain: 4 sc, inc (14)
We continue to knit in a circle.
2 row: inc, 4 sc, 3 inc, 4 sc, 2 inc (20)
3 row: 1 sc, inc, 4 sc, (1 sc, inc) * 3, 4
sc, (1 sc, inc) * 2 (26)
4 row: 2 sc, inc, 4 sc, (2 sc, inc) * 3, 4
sc, (2 sc, inc) * 2 (32)

Circle the foot on the plastic and
cut out two plastic insoles. AT
as plastic I used
regular plastic lids
cans.

Change thread to Nako Lily cream
colors. Cut the white thread, fasten
and hide.

5 row: behind the front half of the loop
knit: 32 sc
6-7 row: 32 sc
8 row: 6 sc, (dec, 1 sc) * 6, dec, 6 sc
(25)
9 row: 25 sc

6-7 row: 32 sc
8 row: 6 sc, (dec, 1 sc) * 6, dec, 6 sc
(25)
9 row: 25 sc
10 row: 6 sc, 7 dec, 5 sc (18)

Insert the plastic insole into foot:
11-20 row: 18 sc
21 row: (1 sc, dec) * 6 (12)
We stuff the leg tightly enough.
The tighter we fill, the more stable
there will be a bear.
Between 20 and 21 rows we insert a disk
with a pin on the side of the leg. Pro
pin fastening is possible
read at the beginning of the
22 row: dec * 6 (6)
23rd row: dec to end
Similarly, we knit the second leg,
only cotter pin we insert with
opposite side of the leg.
Here we got these legs:

Hands (2 pcs):
1 row: dial 2 ch and knit in
second loop from the hook 6 sc (6)
Continue knitting in the round.
2 row: inc * 6 (12)
3 row: (inc, 3 sc) * 3 (15)
4-5 row: 15 sc
6 row: 4 sl-st, 11 sc (15)
7 row: 6 sc, 2 dec, 5 sc (13)
8 row: 6 sc, dec, 5 sc (12)
9-17 row: 12 sc
18 row: dec * 6 (6)

We stuff our hand tightly. hands
we give the shape of the bend, where we had
connecting posts.
Since our hand is rather narrow,
First, insert the disk from above:
And then between 17 and 18 rows
cotter pin:

19 row: decrease to the end.
Similarly, we knit the second hand:
Trunk, head, neck:
1 row: dial 2 ch and knit in
second loop from the hook 6 sc (6)
Continue knitting in the round.
2 row: inc * 6 (12)
3 row: (sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5 row: (3 sc, inc) * 6 (30)
6 row: (4 sc, inc) * 6 (36)
7 row: (5 sc, inc) * 6 (42)
8 row: (6 sc, inc) * 6 (48)
9 row: (7 sc, inc) * 6 (54)
10 row: (8 sc, inc) * 6 (60)
Between 8th and 9th rows of the body insert a cotter pin from the leg:
Attention: since the toy is knitted according to
spirals, possibly with one
side of the leg (arm or eye)
must be omitted or
raise. So that the legs (arms and eyes)
were on the same level.

From the inside we put on
cotter pin disc:
And twist very, very tight,
nippers “antennae” from the cotter pin. How
the tighter you twist, the more stable
Mishka will stand.

Exactly parallel with
opposite side of the body
insert the cotter pin of the second leg:

And we fix it in the same way as the first leg.
We got these legs:

11-20 row: 60 sc
21 row: (18sc, dec)3 (57) 22nd row: 57 sc 23 row: (17 sc, dec)3 (54)
24th row: 54 sc
25th row: (16 sc, dec)3 (51) 26 row: (15 sc, dec)3 (48)
27th row: (6 sc, dec)*6 (42)
We tightly fill the body with filler.
Next, attach the handles. At level 26-27
row, exactly above the legs, insert
handle pins:

Like the legs, we twist the “antennae” from
cotter pin with wire cutters:
28 row: (5 sc, dec) * 6 (36)
29 row: (4 sc, dec) * 6 (30)
30 row: (3 sc, dec) * 6 (24)
31 row: (sc, inc) * 12 (36)
32 row: (2 sc, inc) * 12 (48)
33 row: (3 sc, inc) * 12 (60)
34 row: (4 sc, inc) * 12 (72)
35-40 row: 72 sc
41 row: (10 sc, dec) * 6 (66)
42 row: (9 sc, dec) * 6 (60)
43 row: (8 sc, dec) * 6 (54)
44 row: (7 sc, dec) * 6 (48)
Between 42 and 43 rows we insert
eyes.
Between the eyes should be
distance 6 loops or 3 cm:
45 row: (6 sc, dec) * 6 (42)
46 row: (5 sc, dec) * 6 (36)
47 row: (4 sc, dec) * 6 (30)
48 row: (3 sc, dec) * 6 (24)
49 row: (2 sc, dec) * 6 (18)
50 row: (sc, dec) * 6 (12)
51 row: dec * 6 (6)
52 row: dec to end



Drawstrings:
Needle with thread for knitting (color
the bear itself), enter on the neck,
in the middle, as shown in the photo:
We fix the thread and bring it out near
outer corner of the right eye:
Lightly pull, then grab
one loop and insert the needle again and
we bring it out on the neck. Pull lightly.
On the neck we grab the loop again and
bring the needle out near the outer corner
left eye:
You can also repeat the tightening, but
you need to tighten it up a little. A thread
cut and hide.



We got this form faces:
The eyes seem to be slightly sunken.
Nose:
We knit with Alize Softy white yarn:
1 row: dial 2 ch and knit in
second loop from the hook 6 sc (6)
Continue knitting in the round.
2 row: inc * 6 (12)
3 row: (sc, inc) * 6 (18)
4th row: inc hdc3, 6 sc, inc hdc3, 6
sc (24)
5-6 row: 24 sc
Cut the thread, leaving 30 cm for
sewing
Counting two rows from above on the nose,
insert nose:
On the inside, nose
we fix:



With clubs we attach the spout to
muzzle:
Carefully sew our nose:
At the end, the spout needs to be slightly stuffed:
From below, in the middle of the spout, we
make a slight tightening, as shown in
a photo




Our muzzle is ready:
Ears (2 pcs):
1 row: dial 2 ch and knit in
second loop from the hook 6 sc (6)
Continue knitting in the round.
2 row: inc * 6 (12)
3 row: (sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5-6 row: 24 sc
Cut the thread, leaving 30 cm for
sewing.
Fold the ear in half
sew to the head, approximately from
center counting 4 rows:




On the inside of the ear, too
sew on:
Sew the second ear in the same way:
Tail:
1 row: dial 2 ch and knit in
second loop from the hook 6 sc (6)
Continue knitting in the round.
2 row: inc * 6 (12)
3 row: (sc, inc) * 6 (18)
4-5 row: 18 sc
Cut the thread, leaving 30 cm for
sewing.
We attach with English maces
behind our tail and sew:
At the end, lightly fill the tail, and
sew to the end:




Well, our bear is ready!
It remains to tie him a set
clothes…
Set of clothes:
First of all, I would like to say
when we knit clothes we always need them
try on. Otherwise it might work
so that the set will be large or
small Everyone knits differently: someone
free, someone tighter. If a
feel that, for example,
the coat is not enough, “step back” a little
from the scheme proposed in this
master class, and add an extra
loop. In general, a flight of fancy and
forward…
Let’s start this set with a hat.
Beanie:
(YarnArt Mink yarn white,
yarn Alize Superlana klasik red
colors, stocking knitting needles No. 2.5 – 5 pcs,
scissors)
With a white thread we collect 70
loops and distribute them on 4 knitting needles
(17+18+17+18).
Next, knit in a circle.
1 row: 70 persons
2-5 row: (1 persons, 1 out) * 35 (70)


Change the thread to red. White
cut, fasten and hide.
6-38 row: 70 persons
39 row: (knit 5, dec) * 10 (60)
40-43 row: 60 persons
44 row: (knit 4, dec) * 10 (50)
45-48 row: 50 persons
49 row: (knit 3, dec) * 10 (40)
50-53 row: 40 persons
54 row: (k 2, dec) * 10 (30)
55-58 row: 30 persons
59 row: (k1, dec)*10 (20)
60-63 row: 20 persons
On the next row, with
hook, remove all loops from the knitting needles on one
a thread.
Pull off the top of the hat.



Turn the hat inside out
side and tie this thread strong
knot.
Attention: do not pull the thread strongly
otherwise it may break.
Pompon:
(yarn Nako Mohair Delicate white
colors, hook, scissors).
We take a white thread and wind it around
thick fingers.
Then we pass the hook between
middle and ring fingers:
Grab the cut thread, length
30 cm. And pull it to another
side. With this thread we connect our
beam.
Next, remove the bundle from the hand. And
cut the threads on the sides with scissors.



This is how the pom-pom turned out:
Let’s start straightening it out. cut off
threads about 1.5 cm to our
the pom pom was thick.
The threads that
tied our pompom, do not touch.
For the remaining white threads
tie the pompom to our
cap.
Passing the hook through
loops at the tip of the cap and
grab the white thread:
Do the same with the second end.
white thread. We sell it with
opposite side.
We tie our threads to a strong
knot and cut to the length of the pompom:
Our hat is ready:
Coat:
(YarnArt Mink yarn white,
yarn Alize Superlana klasik red
colors, circular knitting needles No. 2.5 – 2 pcs,
scissors, buttons – 3 pcs)
We start knitting coats with raglan,
back rows. According to the rules
knitting: the first extreme loop
just filming the last one
we knit the wrong side. At
knitting we will also observe this
rule.
Cast on 58 stitches.
1 row: k, 1 knit, 4 out, 7 knit, yarn over, 1
knit, yarn over, 7 knit, yarn over, 1 knit, yarn over,
14 knit, yarn over, 1 knit, yarn over, 7 knit,
yarn over, 1 knit, yarn over, 7 knit, 4 out, 1 knit,
to (66
In the next row we will knit
buttonhole.
2 row: to, 1 out, 1 persons, 2 loops to close,
55 out, 4 persons, 1 out, to (64)
3 row: k, 1 knit, 4 out, 8 knit, yarn over, 1
knit, yarn over, 9 knit, yarn over, 1 knit, yarn over,
16 knit, yarn over, 1 knit, yarn over, 9 knit,
yarn over, 1 knit, yarn over, 8 knit, 1 out, 2
nakida, 1 out, 1 persons, to (74)
4 row: k, 1 out, 4 persons, 62 out, 4 persons, 1
out, to (74)
5 row: k, 1 knit, 4 out, 9 knit, yarn over, 1
persons, yarn over, 11 persons, yarn over, 1 persons,
yarn over, knit 18, yarn over, knit 1, yarn over, 11
persons, nakid, 1 persons, nakid, 9 persons, 4 out,
1 out, to (82)
6 row: k, 1 out, 4 persons, 70 out, 4 persons, 1
out, to (82)
7 row: k, 1 knit, 4 out, 10 knit, yarn over, 1
knit, yarn over, 13 knit, yarn over, 1 knit,
yarn over, knit 20, yarn over, knit 1, yarn over, 13
persons, nakid, 1 persons, nakid, 10 persons, 4 out,
1 out, to (90)
8 row: k, 1 out, 4 persons, 78 out, 4 persons, 1
out, to (90)
9 row: k, 1 knit, 4 out, 11 knit, yarn over, 1
knit, yarn over, 15 knit, yarn over, 1 knit,
yarn over, knit 22, yarn over, knit 1, yarn over, 15
persons, nakid, 1 persons, nakid, 11 persons, 4 out,
1 out, to (98)
10 row: k, 1 out, 4 persons, 86 out, 4 persons, 1
out, to (98)
11 row: k, 1 knit, 4 out, 12 knit, yarn over, 1
persons, nakid, 17 persons, nakid, 1 persons,
yarn over, knit 24, yarn over, knit 1, yarn over, 17
persons, nakid, 1 persons, nakid, 12 persons, 4 out,
1 out, to (106)
12 row: to, 1 out, 1 persons, 2 loops to close,
94 out, 4 persons, 1 out, to (104) (In this
row button hole)
13 row: k, 1 knit, 4 out, 13 knit, yarn over, 1
persons, yarn over, 19 persons, yarn over, 1 persons,
yarn over, knit 26, yarn over, knit 1, yarn over, 19
persons, nakid, 1 persons, nakid, 13 persons, 1 out,
2 nakida, 1 out, 1 persons, to (114)
14 row: k, 1 out, 4 persons, 102 out, 4 persons, 1
out, to (114)
15 row: k, 1 knit, 4 out, 14 knit, 23 loops
transfer to an additional knitting needle,
K28, 23 loops transfer to
additional knitting needle, 14 persons, 4 out,
1 persons, to (68)




16 row: k, 1 out, 4 persons, 14 out, 5
Yarn over, 28 out, 5 yarn over, 14 out, 4
persons, 1 out, to (78)
We make capes like this
thread loops:
17 row: k, 1 knit, 4 out, 7 knit, inc, (12
persons, inc) * 4, 6 persons, 4 out, 1 persons, to (83)
18 row: k, 1 out, 4 persons, 71 out, 4 persons, 1
from, to (83)
Here are the holes for the sleeves we have
got:
19 row: k, 1 knit, 4 out, 8 knit, inc, (13
persons, inc) * 4, 6 persons, 4 out, 1 persons, to (88)
20 row: k, 1 out, 4 persons, 76 out, 4 persons, 1
from, to (88)
21 row: k, 1 knit, 4 out, 9 knit, inc, (14
persons, inc) * 4, 6 persons, 4 out, 1 persons, to (93)
22 row: to, 1 out, 1 persons, 2 loops
close, 81 out, 4 persons, 1 out, to (91) (B
button hole in this row)
23 row: k, 1 knit, 4 out, 81 knit, 1 out, 2
nakida, 1, out, 1 persons, to (93)
24,26,28,30 row: k, 1 out, 4 persons, 81 out,
4 persons, 1 out, to (93)
25,27,29 row: k, 1 knit, 4 out, 81 knit, 4
out, 1 persons, to (93)
31 row: close all loops.
Cut the red thread, fasten and
hide




32 row: we attach a white thread and
knit for the front half of the loop:
93 sc, ch, turn (93)
33-35 row: 93 sc, ch, turn (93)
36 row: 93 sc
Sleeve:
We attach the red thread and knit:
1 row: we have on an additional knitting needle
there are 23 loops and we
we get 9 loops from the bottom of the sleeve,
knitting them with facial ones.
Thus, we have all the loops
distributed on 4 knitting needles, 8 each
loops on each.
2-11 row: 32 persons
Change the thread to white. Red
cut, fasten and hide.
12-14 row: 32 persons
15 row: close all loops.
Similarly, we knit the second sleeve:
Collar:
Attach the white thread on top
coat, inside out, like
shown in the photo:
and knit:
1 row: 52 sc
2 row: (9 sc, inc, 10 sc, inc) * 2, 9 sc,
inc (57)


3rd row: inc, 10 sc, (inc, 11 sc, inc, 10
sc)*2 (62)
4 row: (11 sc, inc, 12 sc, inc) * 2, 11
sc, inc (67)
5th row: inc, 12 sc, (inc, 13 sc, inc, 12
sc)*2 (72)
From the front, opposite
slits for buttons, sew on 3
buttons.

Our coat is ready:
Bag:
(YarnArt Jeans yarn red,
yarn yarn Nako Mohair Delicate
white, hook No. 2.5, needle,
scissors)
1 row: dial 2 ch and knit in
second loop from the hook 6 sc
2 row: 2 sc in 1 loop – 6 times (12)
3 row: 2 dc in 1 loop – 12 times (24)
4 row: (1 dc, 2 dc in 1 loop) * 12 (36)
5 row: (2 dc, 2 dc in 1 loop) * 12 (48)
6 row: (3 dc, 2 dc in 1 loop) * 12 (60)
7 row: (4 dc, 2 dc in 1 loop) * 12 (72)
8 row: behind the back half of the loop: (5
dc, 2 dc in 1 loop) * 12 (84)
9 row: (6 dc, 2 dc in 1 loop) * 12 (96)



10-27 row: 96 dc
You can tie the bag higher
adding rows.
Lace:
We knit a lace with a white thread – Nako
Mohair Delicate. leaving about 30
see, do ch:
Then the thread we left
throw on the hook:
And we stretch the main thread through
formed 2 loops:



Then again the remaining thread
sketch, and again the main
stretch. And so we knit the lace up to
the length you need. I managed
150 stitches or length
approximately 45 cm.
We pass the lace to the top
bag. I retreated from the top
2 rows, but in order to top
the pouch looked more beautiful
retreat better 3-4 rows. Lace
pass through every 5 loops:
Next, we make 2 small pompoms,
as for the hat:
And with the help of a needle we sew them to
lace ends:

Our bag is ready:




